How much grout do I need?

Last checked: November 2026

Short answer: Grout (kg per m²) = (tile length + tile width) ÷ (tile length × tile width) × joint width × joint depth × about 1.6. Work in millimetres. Multiply by the floor or wall area, then add 10%.

Calculator (metric)

Most cement-based grouts are about 1.4–1.6 kg per litre once mixed. Check the bag: many makers print a consumption table, and their figure always wins over a general formula.

Where the formula comes from

Every tile shares one long edge and one short edge with its neighbours, so each tile "owns" one length plus one width of joint. Dividing that by the tile's area gives the metres of joint in every square metre of tiling. Multiply by the joint's cross-section (width × depth) and you have the volume; multiply by density and you have the weight.

Worked example

300 × 300 mm floor tiles, 3 mm joints, 8 mm thick: (300 + 300) ÷ (300 × 300) × 3 × 8 × 1.6 = 0.256 kg per m². For a 10 m² bathroom floor that is 2.6 kg, or 2.8 kg with 10% extra — one small bag.

Small tiles change everything

TileJointThicknessAbout kg per m²
600 × 600 mm2 mm10 mm0.11
300 × 600 mm2 mm8 mm0.13
300 × 300 mm3 mm8 mm0.26
100 × 200 mm (metro)2 mm7 mm0.34
50 × 50 mm mosaic2 mm4 mm0.51

A mosaic can need about five times the grout of a large-format tile on the same floor. If you are switching to smaller tiles mid-project, rework the numbers rather than assuming the same bag will do.

Imperial units

Use the same formula in inches, then convert: cubic inches × 0.0164 gives litres, and litres × 1.6 gives kilograms. Or convert your tile sizes to millimetres (inches × 25.4) and use the calculator above.

Buying tips from site

Related

How many boxes of tile · Flooring waste factor · Square feet to square metres