How many deck boards do I need?
Calculator (inches for boards, feet for the deck)
Use the actual width, not the name
Lumber is sold by its nominal size. A "5/4 × 6" or "2 × 6" deck board is about 5½ in wide, not 6, and that half inch adds up across a deck. Measure one board or check the product sheet. Composite boards are usually close to 5½ in as well, but some are different.
The gap
Boards are laid with a small gap so water drains and wood can move. Follow the manufacturer: many composite makers specify their own spacing, and wet pressure-treated boards are often laid tight because they shrink as they dry. The calculator uses ⅛ in by default.
Worked example
A 12 × 16 ft deck with boards running the 16 ft way: 144 in ÷ (5.5 + 0.125) in = 25.6, so 26 rows. With 16 ft boards that is one board per row, 26 boards, or 29 with 10% extra. With 12 ft boards you would need two per row (52 boards) and would have joints to stagger.
Joints and board length
Every joint between two board ends has to land on a joist, so plan board lengths around your joist spacing. Buying boards as long as the deck saves time, looks cleaner and usually wastes less than cutting short lengths. If you must join, stagger the joints so they do not line up across neighbouring rows.
Screws and hidden fasteners
With face screws, the usual pattern is two screws per board at every joist. On a 16 ft run with joists every 16 in, that is 13 joists and 26 screws per board. Hidden clip systems list their own count per square foot on the box.
Related
Concrete for posts · Cubic feet, yards and metres · Measuring area